Anti-Impact Latex Cut 5 Gloves


Scan Anti-Impact Gloves offer a good grip and are highly tear and cut resistant for maximum hand protection in a range of environments. They are suitable for use with construction, mechanical, tools, auto assembly, timber and glass cutting processes.

They have a rubber coated palm for abrasion resistance and a high grade cut 5 resistant HPPE liner for cut protection. The foam latex pads offer anti-impact metacarpal protection.

  • Cut 5 resistant gloves with HPPE liner
  • Foam latex anti-impact metacarpal protection
  • Maximum protection in varying environments
  • Rubber coated palm
  • Conforms to EN420 and EN388

EN388 Mechanical hazard
3 = Abrasion 1-4
5 = Blade Cut 1-5
4 = Tear 1-4
2 = Puncture 1-4
B = 2nd Cut A-F
P = Impact Pass or Fail


List Price ex.VAT £12.25
List price inc.VAT £14.70


 Code SizeQty
 SCAGLOAIM M (8) 1 pair
 SCAGLOAIL L (9) 1 pair
 SCAGLOAIXL XL (10) 1 pair
 SCAGLOAIXX XXL (11) 1 pair
Find a Stockist Size diagram


View Certificate EU Declaration of Conformity
EN420:2003+A1:2009, EN388:2016
View Certificate UK Declaration of Conformity
EN 420: 2003+A1: 2009, EN 388:2016+A1:2018

Catalogue page

Scan Catalogue Page 43pdf
Category image

Glove Selection Guide

Scan provide a range of gloves for protecting the hands with emphasis on the needs of workers in commercial industries where the combination of good protection and user comfort are main requirements.

Standard EN ISO 21420

The EN 420 standard was revised in March 2020 becoming standard​ EN ISO 21420: 2020​.

This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc.

Standard EN388:2016

Providing protection for mechanical risks.

This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion, blade cut, tearing, puncture and impact.

EN388 Example
3 = Abrasion Rating 1-4
5 = Blade Cut Rating 1-5
4 = Tear Rating 1-4
2 = Puncture Rating 1-4
B = 2nd Cut Rating A-F
P = Impact P Pass or Fail

Protection against mechanical risks is expressed by a pictogram followed by a number rating representing test performance against a specific risk. The performance level is from 1-5, where 4 or 5 is the best result. X = not tested. P = Impact test passed.

The level of performance is based on the number of cycles/force required to penetrate the sample.


Abrasion resistance: based on the number of cycles required to abrade through the sample glove.


Blade cut resistance: based on the number of cycles required to cut through the sample at a constant speed.


Tear resistance: based on the amount of force required to tear the sample.


Puncture resistance: based on the amount of force required to pierce the sample with a standard sized point.


2nd Cut resistance: based on the number of cycles required to cut through the sample.


Impact protection: the area of protection is secured over a domed anvil and is impacted at an impact energy of 5J.

View the full EN388 and Glove Selection Guide