All products > Respiratory
Filtered by FFP1 Masks X Remove

Respiratory

images/small/SCAPPEHYG10.jpg

Moulded Comfort Mask - Non PPE

FFP1

images/small/SCAPPEP1M.jpg

Moulded Disposable Mask FFP1

FFP1

images/small/SCAPPEP1MV.jpg

Premier Valved Disposable Mask FFP1

FFP1

images/small/SCAPPEP1FFV.jpg

Premier Fold Flat Valved Disposable Mask FFP1

FFP1

images/small/SCAPPEP1FF.jpg

Fold Flat Disposable Mask FFP1

FFP2

images/small/SCAPPEP2M.jpg

Moulded Disposable Mask FFP2

FFP2

images/small/SCAPPEP2FF.jpg

Fold Flat Disposable Mask FFP2

FFP2

images/small/SCAPPEP2MV.jpg

Premier Disposable Valved Mask FFP2

FFP2

images/small/SCAPPEP2OMV.jpg

Premier Odour Valved Mask FFP2

FFP2

images/small/SCAPPEP2OFFV.jpg

Premier Fold Flat Odour Valved Mask FFP2

FFP2

images/small/SCAPPEP2VDUR.jpg

Duranet Valved Disposable Mask FFP2

FFP3

images/small/SCAPPEP3MVD.jpg

Premier Valved Disposable Mask FFP3

FFP3

images/small/SCAPPEP3FFV.jpg

Premier Fold Flat Valved Disposable Mask FFP3

FFP3

images/small/SCAPPEP3VDUR.jpg

Duranet Valved Disposable Masks FFP3

images/small/SCAPPERESPP2.jpg

Twin Half Mask Respirator with P2 Cartridges

images/small/SCAPPERESPA1.jpg

Twin Half Mask Respirator with A1 Cartridges

images/small/SCAPPECARTA1.jpg

Twin Half Mask A1 Filter Cartridge (Pack of 2)

images/small/SCAPPECARTP2.jpg

Twin Half Mask P2 Filter Cartridge (Pack of 2)

images/small/SCAPPECARTP3.jpg

Twin Half Mask P3 Filter Cartridge (Pack of 2)

Filter Products

FFP1 Masks
FFP2 Masks
FFP3 Masks
Fold Flat Masks
Half Mask Respirator
Moulded Masks
Valved Masks
Category image

Respiratory protection

Respiratory protection is essential when working in an atmosphere contaminated by dust, vapours, fumes or gases. Many health and safety regulations place statutory demands on employers to ensure that the necessary level of protection is provided and used.

Disposable mask protection level guide:

Non PPE

NOT for respiratory protection. Reduces discomfort caused by exposure to coarse, non-toxic particles. Also protects the work piece from exhaled breath of the wearer.

FFP1

Particles larger than 5 microns. General dust, Water based spray, Paint mist (Water based).

FFP2

Particles between 2 and 5 microns. Sanding of softwood, Hand sanding MDF, Ceramic tile dust, Cutting slabs.

FFP2 Odour

Particles between 2 and 5 microns. Solvent paint vapour (Brush applied), Metal dust.

FFP3

Particles less than 2 microns. Loft insulation, Hardwood dust & cutting MDF, Stone cutting, Plastering.

View the 'Respiratory protection selection guide'