All products > Gloves >

Welders Gauntlet - Red

Description

Scan Welding Gauntlet made from cowsplit leather with black welted seams, featuring a one-piece back which provides strength. Fully lined, the guantlets are comfortable to use.

At 350 mm (14in) long, they are excellent at protecting the hand, wrist and lower forearm. Excellent for Welders.

One piece back for extra strength
Fully lined for comfort
Kevlar thread
350mm (14in) long
Conforms to EN388, EN407 and EN420

EN388 Mechanical hazard
4 = Abrasion 1-4
1 = Blade Cut 1-5
4 = Tear 1-4
4 = Puncture 1-4
X = 2nd Cut A-F

EN407
4 = Resistance to flammability index 0-4
1 = Contact heat resistance index 0-4
3 = Convective heat resistance index 0-4
2 = Radiant heat resistance index 0-4
4 = Small splashes of molten metal Index 0-4
X = Large splashes of molten metal Index 0-4

EN12477
Type A - Burning behavior
Type A - Contact heat
Type A - Convective heat
Type A - Small splashes of molten metal

Information

List Price ex.VAT	£10.18
List price inc.VAT	£12.22
Code	SCAGLOWELRED
Size	L
W x L	140 x 350mm
Qty	1 pair

€ £

Find a Stockist Size diagram

Certification

View Certificate	EU Declaration of Conformity EN 420, EN 388:2016 +A1:2018, EN407:2004, EN12477:2001
View Certificate	UK Declaration of Conformity EN ISO 21420, EN 388:2016 +A1:2018, EN407:2004, EN12477:2001

Catalogue page

Scan Catalogue Page 50 pdf

Standard EN ISO 21420

The EN 420 standard was revised in March 2020 becoming standard EN ISO 21420: 2020.

This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc.

Standard EN388:2016

Providing protection for mechanical risks.

This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion, blade cut, tearing, puncture and impact.

EN388 Example
4 = Abrasion Rating 1-4
1 = Blade Cut Rating 1-5
4 = Tear Rating 1-4
4 = Puncture Rating 1-4
X = 2nd Cut Rating A-F
P = Impact P Pass or Fail

Protection against mechanical risks is expressed by a pictogram followed by a number rating representing test performance against a specific risk. The performance level is from 1-5, where 4 or 5 is the best result. X = not tested. P = Impact test passed.

The level of performance is based on the number of cycles/force required to penetrate the sample.

Abrasion resistance: based on the number of cycles required to abrade through the sample glove.

Blade cut resistance: based on the number of cycles required to cut through the sample at a constant speed.

Tear resistance: based on the amount of force required to tear the sample.

Puncture resistance: based on the amount of force required to pierce the sample with a standard sized point.

2nd Cut resistance: based on the number of cycles required to cut through the sample.

Impact protection: the area of protection is secured over a domed anvil and is impacted at an impact energy of 5J.