Thermal Waterproof Latex Gloves

Description

Scan Waterproof Thermal Latex Coated Gloves have excellent thermal insulation properties providing both warmth and water resistance. They are latex coated for excellent grip and abrasion resistance. The brushed acrylic thermal liner, 15g Polyester liner and elasticated cuff give extra comfort.
Ideal for use in cold weather and for freezer work.

  • Offers both warmth and water resistance
  • EN511 Rated brushed acrylic thermal liner
  • 15g Polyester liner and elasticated cuff
  • Latex coated for excellent abrasion resistance
  • Conforms to EN ISO 21420, EN511 & EN388:2016


EN511 Cold hazard protection
X = Convective resistance
2 = Contact cold resistance
X = Water permeability

EN388 Mechanical hazard
2 = Abrasion
1 = Blade Cut
3 = Tear
1 = Puncture
X = ENISO 13997 Cut

Price

List Price ex.VAT £7.49
List price inc.VAT £8.99
£

Sizing

 Code Size Qty Buy Online
 SCAGLOWPTHM M - 9 1 pair linkToolbank
 SCAGLOWPTHL L - 9 1 pair linkToolbank
 SCAGLOWPTHXL XL - 10 1 pair linkToolbank
 SCAGLOWPTHXX XXL - 11 1 pair

Certification

View Certificate EU Declaration of Conformity
EN ISO 21420:2020, EN 388:2016 + A1:2018, EN 511:2006

Glove Selection Guide

Scan provide a range of gloves for protecting the hands with emphasis on the needs of workers in commercial industries where the combination of good protection and user comfort are main requirements.

Standard EN420

This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc.

Standard EN388:2016

Providing protection for mechanical risks.

This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion, blade cut, tearing, puncture and impact.

EN388 Example
2 = Abrasion Rating 1-4
1 = Blade Cut Rating 1-5
2 = Tear Rating 1-4
1 = Puncture Rating 1-4
= 2nd Cut Rating A-F
P = Impact P Pass or Fail

Protection against mechanical risks is expressed by a pictogram followed by a number rating representing test performance against a specific risk. The performance level is from 1-5, where 4 or 5 is the best result. X = not tested. P = Impact test passed.

The level of performance is based on the number of cycles/force required to penetrate the sample.

A

Abrasion resistance: based on the number of cycles required to abrade through the sample glove.

B

Blade cut resistance: based on the number of cycles required to cut through the sample at a constant speed.

C

Tear resistance: based on the amount of force required to tear the sample.

D

Puncture resistance: based on the amount of force required to pierce the sample with a standard sized point.

E

2nd Cut resistance: based on the number of cycles required to cut through the sample.

F

Impact protection: the area of protection is secured over a domed anvil and is impacted at an impact energy of 5J.

View the full EN388 and Glove Selection Guide